Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Irvine, CA
Chimney repair in Irvine is rarely about rebuilding a crumbling masonry stack. It’s about factory-built chimney systems in 1970s Woodbridge tract homes and 1990s Northwood townhomes that have never had their caps, crowns, or gas-log venting properly assessed. We’re Limestone Chimney Sweep, and we’ve served Irvine since 2014 carrying the materials to fix what we find: DuraFlex liners, HeatShield restoration, and Famco and Copperfield caps and dampers. If your firebox is shut behind glass and you haven’t thought about the flue above it in a decade, call (855) 341-5439. We’ll diagnose, document, and repair in one visit.
Why Irvine Homes Are Different
Irvine’s fireplace stock is dominated by gas and gas-log fireplaces and factory-built inserts built into the master-planned villages from the 1970s onward. That single fact changes almost everything about chimney work here. In a city of wood-burning masonry fireplaces, a sweep is mostly about creosote removal. In Irvine, we’re far more likely to be servicing gas burners, inspecting factory chimney systems, and replacing corroded caps on homes in Woodbridge, University Park, and Turtle Rock.
The mild Mediterranean climate means fireplaces run only a few weeks a year during winter cold snaps. Creosote buildup is light, but long idle periods let dust, spider webs, bird nests, and pest activity accumulate in flues and caps. Many gas-log fireplaces in Irvine are used decoratively year-round, producing light soot and lint that still needs periodic removal. HOA-driven standards in Irvine’s villages mean condition documentation for home-sale and HOA inspections is a routine part of the job. A sweep here isn’t just about clean glass and tidy logs. It’s about verifying the factory chimney system is sound, sealed, and safe.
Styles & brands we work with
Our Main Irvine Services
Most Irvine homeowners call us for one of two reasons: they haven’t had their gas-log or factory-built fireplace inspected in years, or a dryer vent has been flagged as a fire hazard. Both are full safety visits, not seasonal chores.
Chimney Sweep in Irvine
In Irvine, a chimney sweep usually means factory-chimney inspection, gas-log servicing, and screen and cap cleaning rather than traditional soot removal. We see gas-log fireplaces in Woodbridge and University Park that have never been swept since the home was built in the 1970s or 1980s, with original caps corroded by decades of coastal-marine air and irrigation overspray. Each visit includes a full condition assessment and written documentation suitable for HOA or home-sale inspection files. Learn more about our Chimney Sweep in Irvine service.
Dryer Vent Cleaning in Irvine
Dryer vent cleaning is the quiet safety upgrade most Irvine households skip. Lint accumulation inside the vent run is the leading appliance fire cause, and Irvine’s long, warm drying season means dryers work harder than homeowners realize. We treat dryer vent cleaning as a fire-safety visit, not an add-on: full run cleaning, airflow check, and a clear report on what we removed. See Dryer Vent Cleaning in Irvine for details on what the job covers and when it’s due.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Irvine
Chimney repair in Irvine most often means fixing what decades of mild-weather neglect and coastal air have done to factory-built systems. Woodbridge and University Park homes built in the 1970s and 1980s frequently have original factory chimney caps and screens corroded by marine air and irrigation overspray, while gas-log fireplaces that run decoratively year-round develop vent and burner issues that standard sweeps never address. Our repair team stocks DuraFlex, HeatShield, Famco, and Copperfield components locally, so when we find a crack, a corroded cap, or a failing joint, we can usually fix it on the first visit rather than scheduling a second. We carry the materials to fix what we find. For the full scope of our repair capability, see Chimney Repair.
Chimney Cap Installation
Signs you need it
If you see daylight through the top of your flue, hear birds in the chimney, or find rust flakes on the firebox floor after rain, your cap is missing or failed.
What it costs in Irvine
A new cap in Irvine typically runs $200 to $550 installed, depending on flue size and whether venting for a gas appliance needs to be included.
How we do it
We measure the flue, select a Famco or Copperfield cap matched to your venting type, and secure it with stainless fasteners at the crown, verifying the draft immediately after installation.
Chimney Cap Replacement
Signs you need it
Rust through the cap body, a screen that’s torn or pushed inward, or moisture staining on the firebox walls are all reasons to replace rather than patch.
What it costs in Irvine
Cap replacement in Irvine runs $150 to $400, with the spread driven by whether we’re reusing the existing mounting collar or replacing the entire assembly.
How we do it
We remove the old cap, inspect the flue tile and mortar joint beneath it, and install a correctly sized Famco or Copperfield replacement before re-checking the draft.
Flue Liner Repair
Signs you need it
Crumbling flue tile, visible gaps between tile sections on a camera inspection, or gas exhaust smell in rooms above the firebox indicate liner failure.
What it costs in Irvine
Flue liner repair via HeatShield restoration typically runs $1,200 to $2,800 in Irvine, far less than a full liner replacement.
How we do it
We camera the flue, clean and prep the damaged surface, and apply HeatShield’s cerfractory material to seal cracks and restore structural integrity without demolition.
Chimney Flashing Repair
Signs you need it
A water stain on the ceiling near the fireplace, peeling paint at the roofline, or water pooling on the firebox floor after rain points to flashing failure.
What it costs in Irvine
Flashing repair in Irvine runs $350 to $850, though steeper roof pitches or multi-layer flashing systems common in some villages push toward the higher end.
How we do it
We identify the failed seam, reseal or replace the flashing, and inspect the surrounding roof and crown to confirm no secondary water entry points remain.
What Chimney Repair Costs in Irvine
| Item | Typical range in Irvine |
|---|---|
| Cap installation | $200 – $550 |
| Cap replacement | $150 – $400 |
| Flue liner repair (HeatShield) | $1,200 – $2,800 |
| Flashing repair | $350 – $850 |
Can you fix a chimney without tearing it apart?
Often, yes. HeatShield liner restoration lets us rehabilitate damaged flues without full teardown, applying a cerfractory seal directly to the existing flue surface. Call (855) 341-5439 to learn if your flue qualifies.
Do Irvine HOAs require chimney inspections?
Many villages require documented chimney condition for resale, and some HOAs ask for inspection records before approving exterior changes. We provide written reports with photos for exactly that purpose. We know the documentation standards Irvine HOAs expect.
Brands We Service in Irvine
We install and service equipment from Olympia Chimney, Famco, and Copperfield, and we stock Gelco and DuraFlex components for liner and venting work. Because we carry parts locally, many Irvine repairs are completed on the first visit. For details, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Irvine, CA
| Service | Typical range in Irvine |
|---|---|
| Chimney sweep (factory-built/gas log) | $175 – $325 |
| Chimney cap installation | $200 – $550 |
| Chimney cap replacement | $150 – $400 |
| Flue liner repair (HeatShield) | $1,200 – $2,800 |
| Chimney flashing repair | $350 – $850 |
| Dryer vent cleaning | $125 – $250 |
| Gas log inspection and service | $150 – $275 |
| Factory chimney inspection with camera | $225 – $400 |
Costs in Irvine are pushed higher mostly by access: older villages like Woodbridge have multi-story rooflines and tight side yards that require more setup, while attached townhomes often need roof access coordinated with an HOA. Every job is priced flat before we begin, so the number we quote is the number you pay.
Neighborhoods We Serve in Irvine
We work across Irvine’s master-planned villages, from the original 1970s tracts to the newer builds near the Spectrum. Most Irvine appointments are scheduled within five to seven business days, with seasonal winter slots filling sooner. We commonly serve:
- Woodbridge
- University Park
- Northwood
- Westpark
- Turtle Rock
Service Area – Cities Near Irvine
Limestone Chimney Sweep serves Irvine and the surrounding Orange County communities, including Tustin, CA, Aliso Viejo, CA, Santa Ana, CA, and North Tustin, CA. If you’re in a neighboring city, we likely cover it. Call (855) 341-5439 to confirm.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Irvine
Most Irvine appointments are scheduled within five to seven business days. Winter is our busiest season in Irvine, so if you’re thinking about a pre-season inspection, book before November. We’ll always give you a specific arrival window when you call.
Exterior changes, like cap replacement or flashing work, sometimes need HOA sign-off depending on the village. We’re familiar with Irvine’s typical requirements and can provide written documentation of condition and work performed. Interior repairs like liner restoration rarely need approval.
Clear the area around the fireplace so we have working space, and let us know if roof access requires a gate code, HOA notification, or coordination with a neighbor for attached townhomes. Also note any known issues, like water stains or odd smells, when you book.
If you have a fireplace in Irvine that hasn’t been checked in years, call Limestone Chimney Sweep at (855) 341-5439 for a free estimate. We’ll tell you exactly what’s going on, show you the evidence, and fix it with materials built to last.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irvine Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Kurt Sutton"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Ramon Ramirez"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Bethany Pruitt