Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Compton, CA | Limestone Chimney Sweep
We provide independent DuraFlex chimney cleaning and service across Compton’s 90220, 90221, 90222, and 90224 ZIP codes, with DuraFlex in East Rancho Dominguez also within our coverage area. What sets our DuraFlex work apart here is simple: Compton’s housing stock is dominated by 1940s through 1960s tract homes where original masonry fireplaces were often sealed, converted, or left untouched for decades. That means a “cleaning” call frequently requires tracing abandoned flues, identifying whether a DuraFlex liner is still in place, and determining whether it’s safe to use. If you need DuraFlex service in Compton, call (855) 341-5439.
Limestone Chimney Sweep works on DuraFlex SS flexible liner kits, Pro stainless relining systems, prefab venting, and termination caps. We’re a full-service chimney and ventilation operation, so when we find a crushed liner or a rusted chase cover during a cleaning, we carry the materials to fix what we find. Our DuraFlex sales & service work follows the manufacturer’s installation specs, but we’re an independent contractor, not a factory-authorized shop.
Why Compton Residents Choose Us for DuraFlex Service
Most chimney companies in Compton can run a brush through a flue. Fewer can tell you whether the DuraFlex liner behind your bricked-over fireplace is actually venting, or whether it’s been crushed, disconnected, or abandoned in place. We’ve spent years working on the exact housing stock Compton has in abundance: stucco tract homes with original brick fireplaces, clay tile flues, and decades of questionable retrofits.
Warren Tilsley, our owner, learned the trade through HVAC and sheet metal programs and years of hands-on work before starting Limestone Chimney Sweep. That background means we approach DuraFlex systems the way a sheet metal mechanic would: checking component fit, termination points, and draft paths rather than just soot levels. Compton homeowners call us because we stock OEM DuraFlex caps, top plates, and connectors where they’re still available, and we’re honest when a repair won’t hold.
Styles & brands we work with





Common DuraFlex Chimney Cleaning Problems We Solve in Compton
- Cracked and missing termination caps. Compton’s dry, sunny climate bakes cap hardware year after year. Santa Ana winds add abrasion. When a DuraFlex cap cracks or blows off, leaves, bird nests, and debris pack the flue. We replace caps with proper DuraFlex OEM components, not generic hardware-store parts.
- Crushed flexible liner sections. Original 1950s masonry fireplaces in Compton have tight offsets and odd angles. When DuraFlex liners were forced through those offsets during installation, we often find kinks or crushed runs that choke draft in lightly used fireplaces. This is one of the most common DuraFlex-specific failures we see in this city.
- Top-plate and flashing seal failures. Because Compton rarely sees freezing temperatures, water intrusion at the top plate goes unnoticed until winter rain arrives. By then, the chase cover or top plate has often rusted through. A Level 2 inspection catches this before it becomes a ceiling stain.
- Abandoned flues from 1970s gas-insert conversions. During the energy crunch, many Compton homeowners bricked over fireplaces or installed gas inserts. DuraFlex components tied into those conversions sometimes vent into wall cavities rather than outdoors. We trace the full run before we clean anything.
- Debris-packed flues from disuse. Compton fireplaces are used only a few weeks a year. That light use means creosote buildup is minimal, but long dry seasons fill unused flues with soot, leaves, and bird nests. Cleaning here is less about creosote removal and more about clearing obstructions.
DuraFlex Service in Compton: What Local Conditions Mean for Your Equipment
Compton’s east side is full of 1950s fireplaces that were bricked over or fitted with gas inserts during the 1970s energy crunch. That means a DuraFlex service call in this city often becomes a search for an abandoned flue or a vent run hiding behind drywall rather than a straightforward sweep. We’ve pulled caps on DuraFlex-relined fireplaces in Compton and found the liner crushed where it was forced through the original masonry offset, with a bird nest packed above it. We cleared the debris, re-terminated the flue with a proper DuraFlex cap, and ran a Level 2 inspection that confirmed the run was drawing again before we closed it up.
This pattern is specific to Compton’s housing stock. Neighboring cities with newer construction don’t have the same concentration of sealed 1950s fireplaces and 1970s conversions, though we do provide West Carson DuraFlex service for similar housing stock there. If your Compton home has a fireplace that hasn’t been used in decades, the first question isn’t “how dirty is it?” It’s “what’s actually behind that wall, and is it safe?”
DuraFlex Models & Products We Service in Compton
We service the full range of DuraFlex residential systems found in Compton homes: SS flexible chimney liner kits, Pro stainless relining systems, prefab fireplace venting, rigid and flexible flue components, and termination caps. When we replace parts, we use DuraFlex OEM caps, top plates, and connectors wherever they’re still available so the reline stays within the original system’s ratings. We only turn to quality aftermarket hardware when OEM parts are discontinued.
If a liner is crushed beyond repair or a chase cover is rusted through, we tell owners plainly whether a targeted repair will hold or whether the reline should be replaced. No upsell, no guesswork. We also handle cap replacement and crown repair as part of our DuraFlex service scope in Compton, along with Compton service area coverage for the entire chimney system.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Compton
DuraFlex chimney cleaning in Compton typically runs $180 to $340 depending on access, flue condition, and whether we’re dealing with a sealed fireplace that needs tracing first. Here’s what shapes the cost:
- Standard DuraFlex cleaning: $180 – $240
- Cleaning plus Level 2 inspection: $320 – $480
- Cap replacement (OEM DuraFlex): $150 – $400 depending on model
- Crown repair or chase cover treatment: $250 – $700 depending on extent
These ranges reflect Compton’s mix of 1940s brick fireplaces and 1980s prefab units. A free estimate includes a visual assessment, and we won’t recommend work without camera evidence you can see for yourself. Call (855) 341-5439 for an exact quote.
Serving Compton, CA — Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Compton
My Compton home’s fireplace was bricked over years ago – can you tell whether a DuraFlex liner is still behind the wall?
Yes. We use a Level 2 inspection with camera equipment to trace the flue path and determine whether a DuraFlex liner is present, whether it’s connected, and whether it’s safe to use. This is one of the most common calls we get on Compton’s east side. If the liner is abandoned or improperly vented, we’ll show you the footage and explain your options. Call (855) 341-5439 to schedule an inspection.
Why does my DuraFlex cap keep coming loose in Compton?
Santa Ana winds and decades of sun exposure loosen cap fasteners and degrade the termination hardware. If the cap was installed without the proper DuraFlex top plate or with mismatched fasteners, it won’t stay put. We re-terminate using OEM DuraFlex caps and top plates sized to your liner, which solves the problem permanently.
My DuraFlex-relined fireplace smokes when I light it after months of disuse – what’s happening?
In Compton, light fireplace use means debris, bird nests, or a crushed liner section are the usual culprits. The draft path gets blocked, and smoke has nowhere to go. We clear the obstruction, check for kinks in the flexible liner, and verify the termination is drawing correctly before we finish the job.
Can you repair a crushed DuraFlex flexible liner instead of replacing the whole reline?
Sometimes. If the crush is isolated and we can re-round the section without compromising the liner’s integrity, we’ll do a targeted repair. If the liner is kinked through a tight masonry offset or crushed in multiple places, replacement is the honest answer. We’ll show you the camera footage so you can see exactly what we’re seeing. Call (855) 341-5439 for a free estimate.
Do you work on DuraFlex prefab fireplaces in Compton’s 1980s apartment buildings?
Yes. Compton has a number of 1980s infill apartment buildings with prefab metal fireplaces that use DuraFlex venting. These systems need manufacturer-specific service, and we’re familiar with the component layouts. Whether it’s a single-family home or a multi-unit building, the inspection and cleaning protocol is the same: verify the vent path first, then clean.
Service Areas Near Compton
We provide DuraFlex chimney and venting service throughout Compton and the surrounding communities. If you’re in DuraFlex service in West Puente Valley, DuraFlex service in Bell Gardens, Paramount, Lynwood, or Willowbrook, we can schedule your inspection and cleaning on the same route as our Compton work.
Book Your DuraFlex Service in Compton Today
If your Compton fireplace has been sealed, converted, or neglected for years, don’t guess at its condition. Warren Tilsley and the team at Limestone Chimney Sweep will inspect, clean, and repair your DuraFlex system properly. Call (855) 341-5439 for a free estimate.
Written by Warren Tilsley, Owner at Limestone Chimney Sweep, serving Compton and surrounding communities, including DuraFlex in Lynwood.