Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Placentia
Dryer vent cleaning in Placentia typically costs $129 – $189 for a standard single-story tract home, and most jobs run about an hour from arrival to final airflow check. We work throughout 92870 and 92871, and because our crews know the local housing stock, we don’t waste your afternoon figuring out where your vent run exits. Warren Tilsley built Limestone Chimney Sweep around a simple idea: if we can’t fix what we find, the inspection isn’t worth much. Call (855) 341-5439 and we’ll schedule a visit that actually tells you something about your home.
Why Limestone Chimney Sweep Is Placentia’s Preferred Dryer Vent Cleaning Company
Placentia’s housing stock gives us a lot of work, and over the years we’ve learned what to expect before we even ring the bell. The homes off Yorba Linda Boulevard, along the older streets near the Placentia Civic Center, and through the 1960s tracts off Orangethorpe Avenue all share a common problem: long duct runs buried in walls that haven’t been touched since the house was built. We know where those vents terminate, how they were framed, and why they clog the way they do.
Customers around Placentia keep calling because we don’t just vacuum the duct and leave. We verify airflow at the dryer and at the exterior termination, and we check whether the vent run shares space with a clay-tile flue that’s already starting to fail. That’s the difference between a cleaning company and a ventilation specialist. Our Dryer Vent Cleaning team treats every visit as a fire-safety inspection, not a maintenance checkbox.
We stock the parts to fix most issues on the first trip: Famco termination caps, Copperfield dampers, rigid duct sections, and replacement connectors. A lot of Placentia customers tell us another company quoted them a cleaning, then came back weeks later with a parts list. We carry the materials to fix what we find.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Placentia
Dryer Vent Cleaning and Lint Removal
This is the core of what we do, and in Placentia it’s rarely a quick job. The postwar tract homes here often vent dryers through runs of 15 to 30 feet, sometimes longer, with elbows hidden behind drywall. Lint packs against those turns over years, and the dryer starts running hotter without any visible symptom. We run professional rotary brushes through the full run, from the dryer connection to the exterior wall cap, then vacuum the line clear. Afterward we check airflow at both ends, because a clean duct that still drafts poorly is one we haven’t finished.
Level 1 Inspection of the Vent Run and Adjacent Flue
Because so many Placentia homes route dryer exhaust near or through the same wall cavities as original masonry chimneys, a cleaning visit should include a basic inspection of what’s around the vent. We look at the accessible duct sections, the termination cap, and any flue we can see from the exterior. If the clay tile has spalled or the mortar joints show gaps, that’s a separate issue we document and discuss with you. We don’t recommend liner work without camera evidence. You’ll see the photos before you spend a dollar.
Airflow and Draft Verification After Clearing
Clearing the lint is step one. Step two is confirming the system actually moves air the way it should. We test static pressure at the dryer connection, verify the exterior damper opens fully, and check for signs the duct was undersized when the house was built. Some of these 1950s and 1960s Placentia homes had 3-inch duct runs installed when modern dryers need 4-inch smooth metal. If that’s the case, we’ll tell you straight, show you the numbers, and quote a replacement with a fixed price before any work starts.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Placentia
We work with components from Famco and Copperfield because they hold up to the heating and cooling cycles a Placentia dryer vent sees every week. Famco makes robust termination caps with proper backdraft dampers, which matters when Santa Ana winds push against the exterior wall and try to force exhaust back inside. Copperfield’s dampers and vent components are built for exactly the kind of long buried runs common in local tract housing. We keep a working inventory of common sizes so most repairs happen on the same day, not after a week waiting on a shipment.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Placentia Homes
- Lint packed at the exterior-wall turn. In postwar tracts, vent runs often travel through an interior wall, turn 90 degrees, and exit through stucco or siding. That turn is where lint compacts hardest. The dryer overheats, the thermal fuse trips, and you think the appliance is failing. Usually it’s the duct.
- Vent runs sharing wall cavities with aging clay-tile flues. If a cracked mortar joint in the chimney flue sits near a lint-filled dryer duct, you have two fire risks in the same wall cavity. We see this arrangement throughout the older streets near the Civic Center and Flagstaff and Bradford avenues.
- Plastic or foil duct from the original install. Many Placentia homes still have white vinyl flex duct from the 1970s or 1980s. It sags, traps lint at the bellows, and melts if the dryer runs hot. Modern code requires smooth metal. We replace it when we clean, if you want it done.
- Mild winters stretching cleaning intervals. Placentia’s Mediterranean climate means the dryer runs hard all year while the fireplace sits idle for months. People remember to sweep the chimney before December but forget the dryer vent has been building lint every single week. Then a Santa Ana day creates a downdraft, exhaust backs into the laundry room, and suddenly the vent is an emergency.
Pricing for Dryer Vent Cleaning in Placentia, CA
A standard dryer vent cleaning in Placentia runs $129 – $189 for most single-story homes. Two-story homes with long vertical runs typically fall between $189 and $249, because the access is more involved and the run usually has more accumulated lint. If the vent shares a wall cavity with a masonry chimney and you want a Level 1 inspection of both, that adds roughly $60 – $90 to the visit, and it’s worth doing if you’ve lived in the house for more than five years and have never looked at the flue. If we find damaged duct sections, we’ll quote replacement parts at cost plus labor, with a fixed price approved before anything is installed. Estimates are free. Call (855) 341-5439 and we’ll give you a number over the phone.
We Also Serve Cities Near Placentia
Our crews work throughout north Orange County, so if you’re in Brea, Anaheim, Fullerton, or Yorba Linda, the same team that cleans Dryer Vent Cleaning in Placentia can handle your vent run too. We schedule routes through these cities most days of the week, so a call from Brea gets the same attention as one from Placentia. Same pricing, same inspection standards, same repair capability.
Serving Placentia, CA — Our Local Coverage Area
We’re based in the Placentia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Placentia
Every 12 months, and more often if the vent run is longer than 20 feet or the dryer takes two cycles to finish a load. Placentia’s older tract homes have longer buried duct runs than newer construction, which means lint accumulates faster and the safe interval is shorter. If you dry laundry every day, a mid-year check is sensible.
The most common cause we find is a vent run partially blocked with lint, usually at the turn near the exterior wall where duct sections meet stucco. The dryer senses restricted airflow and shuts down the heating element to prevent overheating. Clearing the run and verifying airflow fixes it in most cases, and it’s a lot cheaper than replacing the dryer.
No, and if you have this setup, it should be corrected. A dryer exhaust run needs its own dedicated metal duct to the exterior. Sharing a flue with a furnace or fireplace, or running the dryer duct into an old clay-tile chimney cavity, is both against modern code and a fire hazard. We can run a proper separate duct and cap it correctly.
No, because the dryer vent doesn’t care how mild the winter is. Lint builds every time you dry a load regardless of outdoor temperature, and Placentia’s long dry season means that lint is sitting in wall cavities at extremely low moisture content, ready to ignite. Skip the chimney sweep if the fireplace hasn’t been used, but don’t skip the dryer vent.
We clean the full duct run with a rotary brush, vacuum out the line, inspect accessible duct sections and the termination cap, verify airflow at the dryer and exterior, and give you a summary of what we found. If you want a Level 1 inspection of an adjacent flue, that’s an add-on you choose up front. You’ll get the results the same day, and a fixed-price quote for any repair work before anything is scheduled. Call (855) 341-5439 to book.
Written by Warren Tilsley, Owner at Limestone Chimney Sweep, serving Placentia and north Orange County.