Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Lakewood
Dryer vent cleaning in Lakewood typically costs between $110 and $185 for a standard single-story tract home, with most appointments completed in under 90 minutes. We work throughout the 90711, 90712, 90713, and 90714 zip codes, and our techs know the Lakewood Plan housing stock block by block. If your dryer is taking longer than 45 minutes to dry a normal load, or the vent hood outside won’t open when the dryer runs, call (855) 341-5439 and we’ll get you on the schedule.
Lakewood is a specific kind of city. Tens of thousands of nearly identical ranch homes, built between 1950 and 1953, sit in tidy rows with predictable floor plans and predictable vent layouts. That predictability is exactly why local experience matters. We don’t need to guess where your dryer vent terminates, how long the run is, or what’s likely wrong with it. We’ve worked on the same model house twenty times before we ever walk through your door.
Why Limestone Chimney Sweep Is Lakewood’s Preferred Dryer Vent Cleaning Company
We’re a full-service chimney and ventilation company, not a cleaning-only crew. That distinction matters more in Lakewood than almost anywhere else. The original 1950s tract homes here share identical construction patterns, which means identical failure points. A company that only cleans dryer vents will clean your vent and leave. We carry the materials to fix what we find, including stainless steel vent hoods, rigid ducting, and proper flashing components.
Warren Tilsley leads our team, and he’s built the business around a simple principle: diagnose thoroughly, explain honestly, and repair with materials that outlast the original installation. When a Lakewood customer calls about a corroded vent hood, we don’t just note it on a report. We replace it with a stainless steel model that handles salt air far better than galvanised stock parts. That’s the difference between a maintenance visit and a restoration visit.
Our service area covers all of Lakewood, from the neighborhoods around Mayfair Park and west toward Long Beach, up to the Lakewood Country Club area and the eastern edges near Bellflower. Response time is typically same-week, and we route jobs efficiently because we’re working in concentrated tract neighborhoods. One truck can hit four or five homes in a single afternoon without driving far.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Lakewood
Dryer Vent Cleaning
We remove built-up lint from the entire vent run, from behind the dryer to the exterior termination point. In Lakewood tract homes, this often means clearing lint that’s collected at a sagging section of flexible ducting behind the wall or in the attic. Our cleaning includes checking airflow with a digital anemometer, so you get a before-and-after measurement rather than a vague “looks good to us.” Most single-story Lakewood homes fall in the $110 to $150 range for a standard cleaning.
Dryer Vent Inspection
If you’ve never had your vent scoped, or a home inspector flagged a concern during a purchase, we run a flexible camera through the line and show you exactly what’s inside. In Lakewood’s housing stock, we regularly find foil or plastic ducting from the 1950s that’s been crushed, disconnected at a joint, or packed with years of compacted lint. You’ll get a clear explanation of what’s safe, what’s borderline, and what needs replacement. No scare tactics, no padded recommendations. Camera inspection runs about $75 to $95 and is credited back if you proceed with a cleaning or repair.
Dryer Vent Hood Replacement
This is the single most common repair we make in Lakewood. The salt air drifting in from the coast accelerates corrosion on galvanised vent hoods, and after a few years the damper flap either seizes shut or rusts fully open. Seized shut means restricted airflow and a fire risk. Seized open means birds, rodents, and cool coastal air getting into your vent line. We stock stainless steel hoods in the standard 4-inch size that fits most Lakewood Plan homes, plus paintable models if you want to match your exterior. Hood replacement typically runs $130 to $190 including installation.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lakewood
We work with a curated set of trade-level brands for vent and chimney components. For dryer vent replacement, we install Famco and Copperfield hoods, dampers, and ducting rather than whatever generic part ships from a big-box store. These are warrantied components built for long-term exposure. We keep common Lakewood sizes in our trucks, so if we find a rusted hood or a collapsed vent section during a cleaning, we can often fix it the same day without a second visit. Our Dryer Vent Cleaning team carries stainless steel hoods, rigid 4-inch duct, and proper foil tape on every run into Lakewood.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Lakewood Homes
- Corroded galvanised vent hoods. Salt air from the coast hits exterior vent terminations in Lakewood hard. The galvanised flappers rust, pit, and eventually seize, either blocking airflow or failing to close against backdrafts. Homes within a few miles of Signal Hill or Long Beach see this happen in as little as three to five years.
- Sagging original duct runs. The 1950s tract homes often still have their original flexible foil or plastic dryer ducting. It sags behind walls and in attic spaces, creating low spots where lint collects. A 70-year-old vent system was never designed for modern high-capacity dryers.
- Birds and rodents entering through failed dampers. A vent hood that’s seized open is an open door. We’ve pulled bird nests, rodent nests, and paper wasp hives out of Lakewood dryer vents, all because a $14 damper rotted away and nobody noticed.
- Predictable exterior wall locations. In the original Lakewood Plan tracts, the same model’s dryer vent terminates at the same exterior wall location block after block. That uniformity means we know exactly where to look, and it also means the same failure shows up house after house along a single street. If your neighbor just had a corroded hood replaced, you probably need one too.
Pricing for Dryer Vent Cleaning in Lakewood, CA
A standard dryer vent cleaning in Lakewood runs $110 to $150 for most single-story homes. Two-story homes or longer vent runs push that to $155 to $185. Camera inspection is $75 to $95 if booked separately, but it’s credited toward any repair work we recommend. Stainless steel hood replacement runs $130 to $190 installed, depending on the exterior wall finish and whether we need to match existing paint or stucco. If you’re in the 90712 or 90713 zip codes around the Country Club area, pricing stays the same; we don’t charge a premium for location within Lakewood.
What affects your cost? Vent length matters more than anything. A dryer vent that runs 30 feet through an attic takes longer to clean than a short 8-foot run. Lint density matters too. If your vent hasn’t been cleaned in a decade, we may need to disassemble sections rather than push a brush through. You’ll get a firm quote before we start, and that number doesn’t move. Call (855) 341-5439 for an exact estimate. Estimates are free.
We Also Serve Cities Near Lakewood
If you’re in Signal Hill, Bellflower, Long Beach, or Paramount, you’re within our regular route and salt-air exposure patterns are similar, especially closer to the coast. We provide the same full-service Dryer Vent Cleaning in Lakewood residents have trusted for years, extending throughout the surrounding cities. One call covers the whole area.
Serving Lakewood, CA — Our Local Coverage Area
We’re based in the Lakewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Lakewood
Every 12 to 18 months for most Lakewood homes. If your vent hood is already showing corrosion, or if you dry multiple loads a day with a large household, annual cleaning is safer. The salt air doesn’t create lint, but it destroys the components that protect your vent system, so more frequent attention catches problems before they compound. Call (855) 341-5439 to get on a regular schedule.
Coastal air carries salt that settles on exposed metal surfaces, and galvanised steel corrodes quickly under that exposure. Lakewood sits close enough to the coast that exterior dryer vent hoods rust out in a few years. The fix is a stainless steel hood, which resists salt corrosion far better than galvanised stock parts. We stock them and install them on the first visit.
Yes, and it’s common. Many original owners and their successors never had a vent cleaned in 70 years. Lint compacts into dense, flammable mats that restrict airflow and force your dryer to work harder, running up energy costs and increasing fire risk. In tract homes with original foil ducting, the problem is usually worse because sagging sections trap lint faster than rigid pipe would. We can scope it and show you exactly what’s built up.
Clothes take longer than 40 to 45 minutes to dry, the dryer feels unusually hot to the touch, the exterior vent hood doesn’t open when the dryer runs, or you notice a musty burning smell during cycles. In Lakewood specifically, a rusted or stuck vent hood is a sign the whole system needs attention. Any of these warrants a call to (855) 341-5439 before the problem escalates.
Yes, and we do it regularly across Lakewood. We carry stainless steel 4-inch hoods and dampers from Famco and Copperfield on our trucks, plus the proper flashing and sealant for stucco or wood siding. Most replacements take under an hour. We also check the duct run behind the hood while we’re there, since a corroded hood often means the vent pipe itself has started rusting from the outside in.
On a recent job in the Lakewood Plan neighborhood near Mayfair Park, our tech found a 1952 ranch home with a dryer vent hood so corroded by salt air that the damper had seized wide open, allowing cool coastal air and pests into the vent line. We replaced the hood with a stainless steel model and cleared a lint clog that had built up behind the dryer, restoring proper airflow and safety.
That’s the pattern we see block after block. The good news is that it’s predictable, and predictable problems have straightforward fixes. If you live in Lakewood and your dryer vent has been neglected, or your exterior hood looks rusted and stuck, we can get it sorted. Call (855) 341-5439 for a free estimate, or to schedule a cleaning and inspection. We’ll give you an honest assessment, show you the camera footage, and fix what actually needs fixing with materials built for this climate.
Written by Warren Tilsley, Owner at Limestone Chimney Sweep, serving Lakewood since the company’s founding.