Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Newport Beach, CA
Chimney repair in Newport Beach is rarely about heavy heating use. It’s about what the Pacific does to metal and masonry over years of salt-laden air and fog. Most of our repair calls in Newport Beach come from homeowners in Balboa Island, the Peninsula, and Corona del Mar who discovered rusted dampers, pitted chimney caps, or cracked crowns during a pre-sale inspection, or who noticed water staining near the fireplace after a winter storm. We repair what the marine layer corrodes, and we carry the materials to fix what we find on the first visit in most cases. If you suspect chimney damage, call Limestone Chimney Sweep at (855) 341-5439 for a straight answer.
Why Newport Beach Homes Are Different
Newport Beach extends across ZIP codes 92663, 92658, 92659, and 92660, and the housing stock changes block by block. On Balboa Island and the Balboa Peninsula, we work on early-to-mid-20th-century beach cottages and bungalows with original masonry fireplaces. These chimneys often sit unused for years at a time. Creosote doesn’t build up much, but salty onshore air works on dampers, caps, and mortar joints continuously. Metal parts that would last decades in inland Orange County can show serious pitting and rust in five to ten years here.
Further up the hill in Corona del Mar and the 92660 area, we see mid-century and custom homes with larger fireboxes and taller flues. The marine layer still reaches them, but the bigger issue is often long dormancy. A fireplace that hasn’t been lit in years collects debris, bird nests, and corroded components that an inspector flags at sale. Newport Beach chimneys fail from neglect and corrosion, not from overuse, and that changes how we diagnose and repair them.
Styles & brands we work with
Our Main Newport Beach Services
Newport Beach homeowners call us for two services more than any other: a full chimney sweep before lighting a fireplace that sat dormant, and dryer vent cleaning when a home inspector or appliance tech flags a clogged or restricted vent.
Chimney Sweep in Newport Beach
A sweep in Newport Beach starts with a camera inspection, because on a coast where flues sit unused, the question isn’t how much soot is present but what moved in while no one was watching. We remove nests, debris, and creosote, then check the damper, cap, and crown for corrosion. Salt air means metal components often need attention even when the flue itself is clean. If you have an older home near the water, read more about how we handle Chimney Sweep in Newport Beach.
Dryer Vent Cleaning in Newport Beach
Dryer vents in Newport Beach collect lint just like anywhere else, but beach-close homes often route vents through tight crawlspaces and exterior walls where salt air accelerates corrosion on vent hoods and connections. A clogged vent is the leading cause of appliance fires, and a restricted vent forces your dryer to run longer on every load. We treat dryer vent cleaning as a fire-safety visit, not a chore. Find out more about Dryer Vent Cleaning in Newport Beach.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Newport Beach
Chimney repair in Newport Beach means dealing with what salt air and long dormancy do to a fireplace that rarely gets used. In ZIP codes 92663 and 92662, we regularly find chimney caps pitted through with rust, dampers seized from corrosion, and crowns cracked from years of marine-layer moisture. On Balboa Island, we’ve opened flues that hadn’t seen a fire in a decade and found the metal components inside rusted beyond function even though the masonry looked fine from the ground. This is the full scope of our Chimney Repair work: we diagnose, then restore or replace what the coast has degraded, using professional-grade material rather than generic hardware. Below are the repairs we handle most often in Newport Beach.
Chimney Cap Installation
Signs you need it
You see daylight or water inside the flue, or birds and debris have gotten in and there’s no cap present.
What it costs in Newport Beach
Chimney cap installation in Newport Beach typically runs $165 to $385 depending on flue size and cap material.
How we do it
We measure the flue, select a stainless or copper cap sized for the opening, secure it with mechanical fasteners, and verify the draw before we leave.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, mesh is torn, or water is entering around a cap that’s too small or improperly seated.
What it costs in Newport Beach
Chimney cap replacement in Newport Beach typically runs $135 to $355 including removing the old cap and hauling it away.
How we do it
We remove the corroded cap, inspect the flue opening for damage, and install a new cap built to handle coastal salt exposure.
Chimney Liner Installation
Signs you need it
A camera inspection shows cracked clay tiles, gaps between tile sections, or no liner at all.
What it costs in Newport Beach
Chimney liner installation in Newport Beach typically runs $1,800 to $3,600 depending on flue height, access, and liner material.
How we do it
We inspect the flue with a camera, size the liner to the appliance and flue dimensions, then install the liner and verify draft with a smoke test.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling near the fireplace, damp drywall around the chimney chase, or visible gaps where flashing meets the roofline.
What it costs in Newport Beach
Chimney flashing repair in Newport Beach typically runs $280 to $750 depending on how much flashing must be removed and replaced.
How we do it
We pull the damaged flashing, inspect the underlying mortar, install new step flashing with proper overlap, and seal the transitions against coastal rain.
What Chimney Repair Costs in Newport Beach
| Item | Typical range in Newport Beach |
|---|---|
| Chimney cap replacement | $135 – $355 |
| Chimney cap installation | $165 – $385 |
| Chimney flashing repair | $280 – $750 |
| Chimney liner installation | $1,800 – $3,600 |
How much does chimney repair cost in Newport Beach?
Smaller repairs like cap replacement or flashing work run $135 to $750, while a full liner installation ranges from $1,800 to $3,600. The exact number depends on roof access, flue condition, and how much salt air has corroded existing parts. Call (855) 341-5439 for a fixed quote after a camera inspection.
Do I need a chimney repair if I never use the fireplace?
Possibly yes, especially in Newport Beach. Salt air corrodes metal dampers and caps even when no fire is ever lit, and water entry through a failed crown or cap damages masonry year-round. A camera inspection tells you what’s actually failing. Call us and we’ll show you the footage before quoting any repair.
Brands We Service in Newport Beach
We work with Copperfield, DuraFlex, and HeatShield products because coastal corrosion demands materials built to withstand salt exposure. We stock common cap sizes, dampers, and liner components locally, which means many Newport Beach repairs are completed on the first visit rather than after a parts-order delay. See our brands for the full line we carry and install.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Newport Beach, CA
| Service | Typical range in Newport Beach |
|---|---|
| Chimney sweep (inspection included) | $125 – $250 |
| Chimney cap replacement | $135 – $355 |
| Chimney cap installation | $165 – $385 |
| Chimney flashing repair | $280 – $750 |
| Chimney crown repair | $450 – $1,200 |
| Chimney liner installation | $1,800 – $3,600 |
| Dryer vent cleaning | $90 – $180 |
Prices in Newport Beach trend toward the upper end of those ranges when the home is on the Balboa Peninsula or Balboa Island, where roof access is tighter, parking is constrained, and salt corrosion means components take longer to remove. You get the price before we start, not a surprise at the end.
Neighborhoods We Serve in Newport Beach
We work throughout Newport Beach, from the beach cottages of Balboa Island and the Peninsula to the hillside homes of Corona del Mar and the newer construction in Newport Coast. Most of our Newport Beach appointments are scheduled within one to two weeks, and we often can arrive sooner for pre-sale inspection deadlines.
- Balboa Island
- Balboa Peninsula
- Corona del Mar
- Newport Coast
- Lido Isle
Service Area – Cities Near Newport Beach
Limestone Chimney Sweep serves Newport Beach and the surrounding Orange County communities. If you’re in Costa Mesa, CA, San Joaquin Hills, CA, Fountain Valley, CA, or Irvine, CA, we can schedule the same camera-based inspection and repair work there. Call us and we’ll confirm the next available appointment for your area.
Serving Newport Beach, CA — Our Local Coverage Area
We’re based in the Newport Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Newport Beach
Most repairs like cap replacement, flashing repair, and liner installation fall under standard maintenance and don’t require a separate permit. If a repair involves structural rebuilding of the firebox or chimney stack, Newport Beach may require plan review. We’ll tell you before work begins if a permit is needed.
We prioritize pre-sale inspections and can usually get to a Newport Beach property within a few business days. The inspection includes a camera pass through the flue and a written summary of what’s working, what’s corroded, and what must be addressed before close. Call (855) 341-5439 and mention the escrow timeline.
Yes. Many Newport Beach condo buildings and HOA-managed properties have shared or individual fireplace flues with specific access rules. We coordinate with property managers and can provide the documentation an HOA board typically requests for chimney maintenance. Contact us and we’ll handle the scheduling and paperwork.
If your Newport Beach chimney has sat unused through a few winters of salt air, the smart move is a camera inspection before the next rain. Call Limestone Chimney Sweep at (855) 341-5439 for an honest assessment and a fixed price on whatever the camera finds.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Newport Beach Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Raj Mehta"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Marisol Herrera"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Rachel Rhodes